
82 83
tion is activated, the heating valve opens immediately
for 5 minutes at 80% (factory setting). There will be a
pleasant room temperature right away because of the
radiated heat. By the end of the 5 minute Boost phase,
the radiator thermostat automatically changes back to
the prior operating mode.
Activate Boost function:
• Press the Boost button (
) to activate the Boost
function.
• The remaining time for the function is counted down
in seconds („300“ bis „000“). Whilst the function is
active,
is displayed.
• The activity symbol (
) is displayed as long as the
adjusting pin opens/closes the valve.
• Once the set time has elapsed, the radiator ther-
mostat switches back to the mode that was active
previously (Auto/Manu), with the temperature that
was set previously.
• The function can be deactivated prematurely at any
time by pressing the Boost button again.
If the radiator thermostat is used in connection
with a HomeMatic Central Control Unit, the dura-
tion of the Boost function and the valve opening
canalsobeconguredviathesoftwareinterface
WebUI.
The radiant heat will not have an immediate ef-
fect if the radiator is covered or concealed (e.g.
by a sofa).
If the duration of the boost function is set so that
the display exceeds 999 seconds, the display
value switches from seconds to minutes.
14 Congurationmenu
Settings of the radiator thermostat can be changed in
thecongurationmenuofyourdevice.Themenucan
be accessed by pressing the Auto/Mode button (
) for
more than 3 seconds.
> 3 Sec.
Menu items can be selected with the handwheel and
conrmedwiththeBoostbutton(
). By pressing the
Auto/Menu button (
) again, you can return to the
previous level. The display will change back to normal
Kommentare zu diesen Handbüchern